洗模液 Wash mould liquid

产品功能：                                                                                                                                                                    

高品质模具专用清洁剂，模具污垢瞬间内完全清除，使用方便，使用该产品清洗模具对模具没有损伤，能延长模具使用寿命,减少企业模具维护保养成本,提高处理模具效率,经济方便实用，各模具表面污垢处理首选方案。

Product features:                                                                          

High-quality mold cleaner can remove mold dirt and is easy to use. It can not damage the mold by using the product to clean the mold, prolong the service life of the mold, reduce the maintenance cost of the mold, improve the efficiency of processing the mold, and is economical and convenient.

使用方法：     
1、喷洒法：将原液或稀释液连续喷洒在模温120-200℃的模具上，喷涂的过程中不要让洗模水蒸发干，需要持续的填补喷洒洗模水，待洗模水对污垢反应2—3分钟后，污垢浮出、软化，用清水冲洗干净。
2、浸渍法：铁槽内盛装原液或稀释液，加温到100℃左右浸渍2-3分钟。或将模具加温到95℃以上，直接投入洗模水溶液中，浸泡2-5分钟左右，污垢溶解后取出，用清水冲洗即可。

Instructions:     
1. Spraying method: Spray the original solution or diluent continuously on the mold with the mold temperature of 120-200 °C. Do not let the washing water evaporate dry during the spraying process. It is necessary to continuously add spray washing water to the mold. After 2-3 minutes of reaction, the dirt floats out, softens, and rinses with water.
2. Impregnation method: The original solution or diluent is contained in the iron tank, and the temperature is immersed to about 100 ° C for 2-3 minutes. Or warm the mold to 95 ° C or above, directly into the washing solution aqueous solution, soak for 2-5 minutes, remove the dirt, remove it, rinse with water.

产品包装：                                                                                                                                                    

25公斤/桶。 

Product packaging:                                                                                                

Light yellow transparent liquid; 25kg/bucket.

产品特性Product properties: